Home > Knowledge > Content
PVC board and linen board contrast
- Oct 27, 2018 -

PVC floor and linen floor belong to elastic floor, but there are differences.

Compositions and production processes are different: flax flooring is made from a mixture of oxidized flaxseed oil, cork and wood flour, laminated onto the jute backing. PVC flooring is made of PVC and its copolymer resin as the main raw materials, fillers, plasticizers, stabilizers, colorants and other accessories, on a continuous sheet substrate, by coating process or by calendering, extrusion or extrusion process. From this point of view, flax is made of natural flax, while PVC flooring is made of PVC, but it is also a green material.

Wear resistance and stability are different: linen floor is generally resistant to the mark, linen floor hard soft, which is why the thick linen floor is not very good resistance to the mark, compared with PVC floor better wear resistance. In addition, the size stability of flax floors is general, therefore, must use a strong glue, from the overall point of view, the stability of flax floors less than PVC floors.

Maintenance difficulty varies: flax floors need to be maintained in natural light, samples and objects will be different, yellowing, flax floors for maintenance products (PH > 7) resistance is poor, flax floors in need of re-polishing, waxing must use special maintenance products. Flax floors are much harder than PVC floors, but because of their porous surfaces, all the stains must be removed quickly, otherwise the surface will leave an indelible impression and have to be polished and waxed again. Because it is not a thermoplastic material, so can not be recycled, burned marks can be easily worn away, but for deeper burns, thorough PVC floor than linen floor grinding much easier.

It is difficult to install flax floors. If the indoor temperature is too low, the flax floors will break. Due to its absorption properties and dimensional instability, the product must be quickly installed with strong glue. For example, in a day, an installation team can lay 80 to 100 MP PVC floors, or maybe only 60 MP linen floors. Linen oil is not sensitive to temperature, can not be used with the same material electrode for welding, so it is not welding but "joints", so linen floor can not be divided into E3 waterproof class, linen floor is not suitable for wet rooms or areas with clean requirements. Flax floors will smell strong and stay in the rooms installed.